Tibbels USA FUEL Can Solve Diesel Contamination Problems While Saving Your Fuel!

Published: Sunday, August 14, 2011 7:00 am
By: Tibbels Marina

USA Fuel Solution inside your tank and engine
The money you spend on gas for a day could end up costing you thousands of dollars if it contains too much alcohol. The United States Environmental Protection Agency (EPA) recently waived a limitation on selling fuel containing more than 10 percent ethanol. The waiver allows the sale of fuel containing up to 15 percent ethanol for use in cars and light trucks, but not boats.
Much is dependent on the age of your motor. 1970s and 1980s engines were built for the use of leaded gasoline, which means that the popular E10 will cause more stress to your motor. The manufacturers have no idea just how badly the E15 will react to these engines.
Ethanol fuel does not produce as much power, which causes the engine to work harder and also reduces fuel economy. But the biggest issue is phase separation.

USA Fuel Cleaning
Alcohol attracts moisture. Humidity and climate contribute to moisture amounts. When a tank of gas sits undisturbed, a layer of alcohol and water will separate from the gas and the water will sink. Gas is used from the bottom of your tank first. The layer of water is first injected into your engine. This process is called phase separation. Fuel has to be cleaned, because there is no way to mix the two layers back together. USA fuel cleaning and purifying system can fix your problem. A certified technician will remove the dirt and water from the bottom of your tank. They will then fill the tank with fuel to clean the sides of the tank. By using a dialysis method, they add our strong chemical and circulate the old fuel, restoring it and making it usable. You will not have to drain fuel. Instead you will be able to use the treated fuel in your engine.
Once the water and separated fuel enter the engine, carburetors and fuel injectors become clogged with gum mixture. When this occurs, our cleaning system removes this gum mixture from the tank. Using our Shok additive will help minimize this problem if it is 1/4 to 1/2 percent by volume. It will also help to prevent and maintain against future problems if used correctly.
As the water separates from the fuel, it makes contact with internal metal parts, and rust and corrosion begin. Parts will have to be replaced to restore performance. If phase separation is caught early, our Shok additive will prevent and slow down the corrosion process by preventing the water from entering into the internal parts. Continual use will ensure the prevention of the corrosion.
Shok additive is safe for gaskets, hoses, fuel pumps, and carburetors. However, it will not protect against fuel line erosion. Once the alcohol has entered the fuel line, it will erode and need to be replaced. Once replaced, using our additive will prevent your fuel line from being damaged. You will need to replace the fuel line with an alcohol resistant line.

USA Fuel Additive, Shok, will eliminate separation problems for 12 to 18 months.

Mixture is light yellow.
Do not run if octane or cetane is too low.
It has a different smell than normal gas.

*Remember, separation cannot be reversed.*

To Avoid Phase Separation:

Use Gas or Diesel Shok.
Fill fuel tanks 3/4 full.
Water in atmosphere is absorbed in ethanol.

USA Fuel Additive: Gas and Diesel Shok

Burns ethanol fuel more effectively.
This product will stabilize E-10 & E-15 fuel.
It prevents corrosion.
Cleans injector and carburetors.
Regular fuel & ethanol (DO NOT MIX).
The additive will eliminate the problem.

With new fuels, the ultra low sulfur in diesel fuel is a double edged sword.
Negative Points:

Less storage stability
A decrease in power
Lower fuel economy
Increased static discharge
Lower lubricity
Can cause seals to leak

Positive Points for using Desl Shok ™:

It burns much cleaner.
Can extend the time between oil changes.
Enables American automakers to meet EPA clean air standards.
Newly designed diesel engines in light trucks and cars get 35-55 mpg.
Lasts much longer than gasoline engines using DESL SHOK™

Use an additive, DESL Shok™ to stabilize the fuel and eliminate water!
Continued use of DESL Shok™ on every fill up will prolong engine performance. Fuel polishing and filtering with our chemical will clean the side walls and bottom of the tank for the best solution to continued boating. It will also prevent unwarranted break downs!

About Tibbels Marina: We offer a wide range of services, including fuel management, fuel filtering and fuel additives for: gas or diesel driven engines, all marine use, off road equipment, all lawn and garden equipment, all recreation equipment, and old vehicles (replaces lead additive), as well as certified fuel testing and tank cleaning. Dealer application is available.